Bison Contact Adhesive Universal Super Strong Bonds Instantly

Working Conditions: Use adhesive and parts to be bonded at
room temperature only. The relative humidity must be below
65 %. This is to avoid formation of bubbles in the final product.
Once attached, adjustment is no longer possible. Always test on
an (inconspicuous) part of the surface first.
Surface Requirements: Surfaces must be dry, clean, dust- and
grease-free and a good fit. Clean and degrease the surfaces to
be bonded for optimal results.
Preliminary Surface Treatment: For optimal result, degrease first.
Tools: Use a solid brush or fine-toothed (1 mm) glue spreader
to cover large surfaces. Use a roller or rubber mallet to join the
materials firmly.
Coverage: 2-2.5 m²/litre, applied on both sides, depending on
the nature of the materials to be bonded.
Directions for use:
Stir well before use. Should preferably not be diluted.
Parts must be clean, dry and free of grease. Coat both
substrates completely. Allow to dry for a minimum of 10-40
minutes. In case of porous materials, apply a second coat and
let dry. Then join parts and roll or tap firmly (with a rubber
Stains/residue: Remove wet adhesive residue immediately with
Degreaser/Thinner for Bison Kit®. Dried excess adhesive can
only be removed mechanically or with a paint stripper (pre-test).
Points of attention: For optimum results, both the adhesive and
the parts to be bonded must be at room temperature (definitely
do not use below +10 °C). The final bonding strength depends
on the pressure applied. Therefore, press as firmly as possible
across the entire surface. Should the adhesive joint between
porous materials be exposed to long-lasting contact with water,
the adhesive may detach from the wet surface.
Viscosity: Liquid
Store properly closed in a cool and frost-free place. Shelf life is
a minimum 24 months.

Super-strong universal contact adhesive based on neoprene
rubber. For innumerable repair and DIY jobs that require
immediate bonding. Extremely suitable for materials under
strain. Moisture and frost proof. Resistant to temperatures
between -40 °C and +70 °C.
Ideally suited for surface bonding or laminating of many
materials that require immediate bonding, loading or
processing. Bonds wood, board, veneer, plastic and metal panel
boards (HPL, Formica®, for example), (foam) rubber, leather,
cork, canvas, linoleum and polyether foam (sound insulation),
among other things, to itself as well as to many other surfaces.
Also for repairing shoes, bags, toys and carpets, or for doing
(hobby) handicraft work.
Not suitable for polystyrene foam (Tempex®), PE, PP and vinyl.

you can browse our website Easyhome

For any special order you can contact us

Email :

Instagram : EasyhomeUAE

Also You Can Contact us on Whatsapp

Phone : +971 2 444 1758


There are no reviews yet.

Be the first to review “Contact Adhesive Universal Super Strong Bonds Instantly”

Your email address will not be published. Required fields are marked